Start with the essentials
Leaf enzymes can continue changing compounds after harvesting. Fixation uses timely heat to reduce relevant enzyme activity and control further oxidation, while also changing moisture, smell and texture. Understanding green tea begins with how heat reaches the leaf.
This article compares pan and steam heat transfer, distinguishes equipment temperature from leaf temperature and connects duration, material and later drying with colour, aroma and processing defects.
Three key points
- Heat manages reaction progressTemperature and duration work with leaf size, moisture and loading.
- Equipment and leaf temperatures differContact and transfer determine how a heat source affects material.
- Later stages still matterShaping and drying follow oxidation control to complete the product.
Connect the process with the tea
Compare clearly identified pan-fixed and steamed green teas through aroma, taste and infused leaves. Add material and drying information; one aroma cannot reveal an exact leaf temperature or processing duration.
The green-tea process
Fixation is the master switch for green tea quality. PPO and peroxidase (POD) catalyse the enzymatic oxidation of catechins. Rapid heating disrupts these enzymes’ protein structure and deactivates them, halting the oxidation cascade. When leaf temperature enters the high-heat zone above roughly 80 °C (176 °F) and exposure is sufficient, most PPO activity falls rapidly; the result still depends on heat transfer, leaf moisture and uniformity. In the study cited here, some PPO activity remained after steam fixation, and later drying reduced residual activity further[1][2].
“Green tea isn’t unchanged — it’s change with the pause button pressed.”
Start with contact between the hands, leaves and pan. This Hangzhou photograph shows how leaves are moved against the metal surface; it does not record leaf temperature or establish whether this moment is fixation or later shaping.

Biochemistry: how heat silences the enzymes
The enzymatic oxidation cascade runs as follows[3]:
Pan fixation: leaf heat cuts off the enzymes
Switch stages; watch the pan and the loupe.
Hot metal, cool leaf
- Pan wall at 200–240 °C
- Loupe: cells still full of water
- Orange: PPO still active
- Keep moving, or spots redden
The pan is far hotter than the leaf; heat must cross in fast.
Conditions, leaf state & sources
- Wok surface temperature
- 200–240 °C
- Measured leaf temperature band
- 25–55 °C
- Effective heating duration
- 0–30 sec
- Leaf moisture (wet basis)
- 75–78%
- Polyphenol oxidase (PPO) activity trend
- High (active PPO/POD enzymes)
- Throughput
- Tossing cycle ~2–3 min; Batch processing (~0.5–1.5 kg/batch)
Turgid, glossy, resilient; surface water droplets visible
Fresh leaves enter the hot wok; leaf temperature remains below the rapid-inactivation threshold (<60 °C). Prompt agitation is required to prevent bruised tissues from developing red-leaf defects.
Conduction-dominated: leaves absorb heat directly from the hot concave wok surface, combined with periodic tossing (tossing-covering synergy) to vent moisture.
References: Synthesised from Tea Processing (R-031) and fixation kinetics studies. Parameters represent general operational scales; actual values vary with tea cultivar, shoot tenderness, batch loading and ambient conditions.
Note: Quality fixation aims for thorough, uniform and balanced inactivation, preventing red leaves, scorched edges or yellow stewing. Steaming (100 °C steam penetration) and microwave fixation follow different thermodynamic systems.
Teaching bands, not a recipe; surface setting is not leaf temperature.
- Substrates: fresh leaves are rich in catechins (EGCG, ECG, EGC) and simple phenols.
- Catalysis: PPO uses molecular oxygen to oxidise catechins to o-quinones; POD can also participate when H₂O₂ is present.
- Polymerisation: quinones are highly unstable and polymerise into theaflavins, thearubigins and even theabrownins — the pigments that darken black and oolong teas.
- Fixation intervention: high heat (pan-firing leaf temperatures 80–100 °C; steaming at 100 °C) rapidly disrupts the PPO/POD structure, inactivating the active site and truncating the oxidation chain within minutes[1].
Öztürk et al. (2016) showed that fixation reduces PPO activity by over 90% and POD activity even more; PPO proved more heat-tolerant than POD, and after steam fixation it was only partly inactivated, with near-complete deactivation reached only during final drying[1].
Enzyme characteristics and heat-inactivation kinetics
PPO and POD are metalloprotein oxidoreductases whose activity depends on temperature and pH[3]:
- Optimum temperature. Leaf PPO works best around 25–35 °C; activity drops quickly above 60 °C and most is lost above 80 °C.
- Optimum pH. PPO is most active around pH 5.0–7.0. Fresh leaf sap is naturally acidic, so once the cell is damaged the enzyme is already in a favourable range — which is why bruised leaf reddens so fast.
- Heat stability is condition-dependent. Leaf source, isoenzyme and assay conditions change the apparent heat stability of PPO and POD. In the Turkish green-tea study cited here, PPO was harder to eliminate completely; production guidance should not assume one universal order of inactivation.
Heat inactivation is not instantaneous — it follows an exponential decay as temperature and time increase. In pan-firing the pan may be 200–300 °C, but that is not the leaf temperature. Leaves touch the hot metal for only a few seconds before being tossed and cooled, so the actual leaf temperature rises quickly to roughly 80–100 °C. If the batch is too large or tossing is uneven, some leaves will be under-heated and “under-fixed”[2][4].
Heat-transfer comparison: pan-firing, steaming, drum and microwave
Different fixation methods differ in how heat reaches the leaf, and that directly affects enzyme inactivation, colour and aroma[1][2][5].
| Fixation method | Heat-transfer mechanism | Leaf-temperature character | Aromatic direction | Typical examples |
|---|---|---|---|---|
| Pan-firing | Metal-to-leaf contact, dry heat | Fast rise, leaf 80–100 °C | Chestnut, bean, fresh | Longjing, Biluochun |
| Steaming | Steam latent heat, moist heat | Even, ~100 °C | Seaweed, vivid green | Japanese sencha, gyokuro |
| Drum fixation | Drum-wall conduction + hot air | Controllable, continuous | Fresh, chestnut | Bulk green tea |
| Microwave + hot air | Microwave volumetric heating + hot air | Fast internal, even heating | Fresh, slight toast | Experimental premium lines |
- Pan-firing. Direct contact with a hot metal surface drives off low-boiling grassy volatiles and triggers Maillard and sugar-amino-acid reactions, producing pyrazines and pyrroles — the source of Longjing’s chestnut/butter-bean note.
- Steaming. Steam transfers heat evenly and quickly, so chlorophyll is preserved better and the liquor stays greener. The moist heat also breaks down S-methylmethionine into dimethyl sulfide (DMS), giving steamed teas their characteristic seaweed-like note.
- Microwave. Polar molecules (mainly water) oscillate and generate heat throughout the leaf, giving fast, volumetric enzyme inactivation. Used alone it can under-develop aroma, so it is usually combined with hot air[2].
- Drum / continuous fixers. The main route for mass-market green tea: temperature, rotation speed and airflow are controllable, giving consistency but usually less aromatic finesse than hand pan-firing.
Drum fixation: falling curtains and venting
Switch stages; follow the drum.
Leaves enter the hot drum
- Hopper feeds leaves steadily
- Loupe: flights lift the leaves
- Burner: inlet 240–300 °C
- Near inlet: cool, PPO active
Continuous, even feeding keeps every leaf on the same heating path.
Conditions, leaf state & sources
- Inlet air / front cylinder temp
- 240–300 °C
- Measured leaf temperature band
- 25–55 °C
- Effective heating duration
- 0–20 sec
- Leaf moisture (wet basis)
- 75–78%
- Polyphenol oxidase (PPO) activity trend
- High (freshly fed)
- Throughput
- Residence time ~1–2 min; Continuous throughput (~100–300 kg/h)
Loose, resilient leaves feeding smoothly through the intake hopper
Fresh leaves slide into the heated rotating cylinder from the hopper, engaging the initial flight baffles as surface moisture starts evaporating.
Radiation & conduction composite: tilted rotating cylinder with internal lifting flights lofts and cascades leaves continuously along the axis toward the discharge chute.
References: Synthesised from Tea Processing (R-031) and fixation kinetics studies. Parameters represent general operational scales; actual values vary with tea cultivar, shoot tenderness, batch loading and ambient conditions.
Note: Quality fixation aims for thorough, uniform and balanced inactivation, preventing red leaves, scorched edges or yellow stewing. Steaming (100 °C steam penetration) and microwave fixation follow different thermodynamic systems.
Teaching bands, not a recipe; surface setting is not leaf temperature.
Compared with an open hand pan, a drum machine holds the leaves inside a cylinder. The opening, gauge and control panel provide a physical counterpart to the diagram above; a panel reading is not a measurement of leaf temperature.

The colour science: why fixation “keeps green”
Green tea’s colour comes from chlorophyll. Fresh leaves contain chlorophyll a and chlorophyll b; their ratio sets the green tone. Under moist heat or acidic conditions the magnesium ion at the centre of the chlorophyll molecule is replaced by hydrogen, forming pheophytin, which shifts colour from fresh green to brown-olive. If the ester bond is also hydrolysed, pheophorbide forms, giving a more yellow-brown hue[3].
During fixation:
- Rapid heating inactivates the enzymes and reduces enzymatic browning.
- Prompt cooling (the tossing motion in pan-firing) prevents the leaves from stewing in their own heat, limiting pheophytin formation.
- Moisture control matters: after fixation the leaves are still hot, and if they are piled before cooling, residual heat drives further non-enzymatic reactions that yellow the leaf.
So “keeping green” is not just a colour issue — it is the result of temperature, time and cooling working together.
Return to the finished tea and examine dry shape separately from the infused leaf. This Longjing sample has flattened leaves; that shape results from the processing sequence as a whole, rather than fixation alone.

Fixation and drying as a relay
Fixation does not do the whole job. Three reasons why drying is still essential:
- Residual activity can remain. Short fixation does not necessarily eliminate PPO and POD at the same rate or completely. Later drying reduces residual activity further, with the extent depending on the tea and drying conditions.
- Moisture remains high. After fixation the leaves still contain about 55–60% water, which is enough medium for residual enzyme activity and microbial growth. Drying brings moisture down to 5–7%, truly “locking” the tea.
- Aroma needs drying to develop. Fixation removes grassy notes and preserves the green base; the finer chestnut, floral and baked notes develop during drying through glycoside hydrolysis and Maillard reactions.
Think of fixation as pressing the shutter and drying as developing and fixing the photograph — both are needed for a lasting image.
Key compound dynamics
| Compound | Fresh leaf | Change after fixation | Quality significance |
|---|---|---|---|
| Catechins (EGCG, etc.) | High | Slight thermal degradation, but mostly preserved | Freshness, astringency, antioxidants |
| Chlorophyll | High | Partly converted to pheophytin | Determines leaf and liquor greenness |
| Amino acids | Medium | Slightly increased by mild protein hydrolysis | Freshness, sweetness |
| Soluble sugars | Medium | Stable or slightly increased | Sweetness, body |
| Glycosidically bound aroma precursors | High | Partly hydrolysed, released or transformed | Base for fresh, chestnut and floral notes |
| Grassy volatiles (hexanal, leaf alcohol) | High | Largely driven off | Removes green/grassy off-notes |
| PPO/POD activity | High | Sharply reduced | Halts enzymatic oxidation |
Reference: Wang et al. (2021), a targeted metabolomics study of Yuhua tea processing, found that after fixation chlorophyll, protein and lipid metabolites decrease, while amino acids, soluble sugars and glycosidic aroma precursors increase, laying the biochemical foundation for green tea’s freshness[5].
Parameters and quality defects
These are common ranges, adjusted in practice for leaf condition, equipment and style[2][4].
| Step | Parameters | Role |
|---|---|---|
| Spreading | room temp, 4–8 h, ~10–15% water loss | sheds some water, softens the leaf; slight enzyme activity |
| Fixation | pan ~200–300 °C, leaf temp 80–100 °C, 1–3 min [1][2] | heat deactivates PPO/POD, halts oxidation, fixes the green; drives off grassy notes |
| Rolling | light→medium→heavy, 5–30 min | ruptures cells, shapes the leaf, aids extraction |
| Drying | bake / pan / sun, to 5–7% moisture [1] | ends residual reactions, sets shape, develops aroma (Maillard) |
Under-fixation causes:
- residual enzyme activity → red edges, dull yellow liquor;
- grassy volatiles not removed → green/grassy aroma;
- too much moisture → storage-related staleness.
Over-fixation causes:
- excessive chlorophyll degradation → grey-yellow dry leaf, yellow-brown liquor;
- scorched edges → smoky/burnt off-notes;
- loss of amino acids and sugars → reduced freshness.
Representative styles
| Style | Fixation method | Key difference | Flavour direction |
|---|---|---|---|
| Longjing (pan-fired) | high-temperature pan-firing | tossing, pressing, covering motions carry leaf temperature quickly past the enzyme optimum | toasted chestnut, fresh and sweet |
| Enshi Gyokuro (steamed) | steam | even steam penetration, gentler temperature rise | seaweed-like, vivid green |
| Huangshan Maofeng (baked) | pan-fired then baked | drying dominated by baking with a gentle gradient | clear high aroma, fresh and mellow |
| Japanese sencha | steam + strong firing/rolling | deep steaming gives a deeper green leaf and liquor | marine, umami-forward |
The steamed-vs-pan-fired aroma divide has a molecular footnote: the “seaweed” note of steamed green tea comes largely from dimethyl sulfide (DMS), produced as S-methylmethionine breaks down in the moist heat of steaming; the strong heat of pan-firing and roasting drives most DMS off, which is why the seaweed note is faint in pan-fired green teas[3].
Fixation method, residual enzyme activity and aroma
| Fixation method | PPO residual trend | POD residual trend | Typical aroma risk | Quality point |
|---|---|---|---|---|
| Pan-firing | Low | Low-medium | Scorched edges, smoky/burnt notes | Toss and cool to avoid stewing |
| Steaming | Medium | Medium | Over-strong seaweed or grassy note | Control steam amount and time |
| Microwave + hot air | Low | Low | Slightly raw or flat aroma | Pair with hot air to develop aroma |
| Drum | Low–medium | Low–medium | Monotone, slight stewed note | Control drum temperature and batch size |
This table reminds us that there is no single “correct” temperature — only a choice matched to the raw leaf and the later steps. Tender buds fear high heat; mature leaves need more heat to fix through.
Common Myths & Scientific Clarifications
Myth 1: “Is fixation simply frying the fresh leaves dry?”
Scientific Clarification: Fixation aims to inactivate enzymes and soften leaf texture rather than fully dehydrate the leaf. Heat transfer rapidly elevates leaf temperature past the critical 80 °C threshold, inactivating polyphenol oxidase (PPO) and peroxidase (POD) to arrest enzymatic browning [1][4]. Moisture declines moderately from ~75% to ~60%, making leaf tissues pliable for subsequent rolling and shaping. Bringing moisture down to the shelf-stable storage threshold (≤6.5%) relies entirely on the final drying relay. Attempting to dry the leaves during fixation causes premature scorching and brittleness.
Myth 2: “Is a higher pan temperature always better for fixation?”
Scientific Clarification: Pan temperature does not equal leaf temperature, and excessive heat creates severe quality defects. Effective fixation requires balancing thermal conduction rates with the latent heat of water evaporation. Excessive pan temperatures (>280 °C) with mismatched batch volumes cause scorched leaf margins and burnt taints [3][4]. Conversely, if tossing and covering movements are unbalanced and steam cannot escape, internal leaf pockets overheat unevenly while delayed heating accelerates localized enzymatic browning, creating red stems and leaves. Skilful fixation requires high initial heat tapered gradually with balanced tossing.
Myth 3: “Is steamed green tea inherently superior to pan-fired green tea?”
Scientific Clarification: Steaming and pan-firing represent two distinct aromatic trajectories rather than a hierarchy of quality. Steaming uses saturated steam to rapidly penetrate leaf tissues, minimizing chlorophyll degradation and preserving cis-3-hexenol alongside dimethyl sulfide (DMS) for vivid emerald liquor and marine seaweed notes [1][3]. In contrast, conductive pan-firing drives Maillard and caramelisation reactions between free amino acids and reducing sugars, synthesising pyrazines and pyrroles that create toasted chestnut and roasted bean aromas [4][5]. Steamed teas excel in marine umami, while pan-fired teas provide robust sweetness.
Myth 4: “Can tea leaves never oxidise or discolour again after fixation?”
Scientific Clarification: Fixation terminates acute enzymatic oxidation, but non-enzymatic degradation remains active over time. Under-fixation leaves residual PPO and POD that may partly recover activity under humid conditions to cause slow catechin browning [1][3]. Furthermore, if finished tea moisture exceeds 7% or leaves encounter oxygen and light, non-enzymatic auto-oxidation degrades chlorophyll into brown pheophytin, while lipid peroxidation generates stale volatile aldehydes like hexanal. High-grade green teas therefore require vacuum sealing, barrier packaging, and low-temperature storage to prevent gradual staling.
See also
- Leaf chemistry — what is in the leaf before fixation
- Longjing green tea — the fixation science behind Longjing’s chestnut note
- Huangshan Maofeng — a baked green tea’s fixation and drying balance
Flavour sketch
After brewing, the opening leaves and liquor complete the view from processing to drinking. Colour can be recorded as an observation, but this photograph alone cannot establish whether fixation was sufficient.

Green Tea (Fixation Profile)
Unoxidized · High-Heat FixationTea Science · core comparison
| Dimension | Green tea (fixation) | Black tea (oxidation) | Oolong (shaking/withering) |
|---|---|---|---|
| Transformation pattern | Early heat suppresses enzymatic oxidation | Extensive enzymatic oxidation (not a universal measured percentage) | Controlled, local and partial enzymatic oxidation |
| Dominant force | heat deactivation of enzymes | PPO/POD enzymatic oxidation | mechanical damage + enzymatic oxidation |
| Core products | preserved catechins, chlorophyll | theaflavins, thearubigins | floral terpenes, some theaflavins |
| Liquor colour | clear green | bright red | golden to orange |
For the full six-tea-class comparison, see The Science of Tea: From Leaf to Six Tea Types.
References
- R-060 — Öztürk, B., et al. (2016). Change of enzyme activity and quality during the processing of Turkish green tea. LWT-Food Science and Technology, 65, 318–324. https://www.sciencedirect.com/science/article/abs/pii/S0023643815300852
- R-061 — 葛庆丰 等 (2011). 绿茶微波热风耦合杀青工艺研究. 食品科学, 32(12), 196–199. https://www.spkx.net.cn/EN/abstract/abstract23448.shtml
- R-029 — 宛晓春 主编 (2003).《茶叶生物化学》(第3版). 中国农业出版社. ISBN: 978-7109066274.
- R-031 — 施兆鹏, 夏涛 主编 (2016).《茶叶加工学》(第3版). 中国农业出版社. ISBN: 978-7109214347.
- R-203 — Wang, Y., et al. (2021). Targeted metabolomics reveals dynamic changes during the manufacturing process of Yuhua tea, a stir-fried green tea. Beverage Plant Research, 1, 6. https://doi.org/10.48130/bpr-2021-0006
Article Knowledge Network
Explore the connections between the teas, processes and flavours in this article.